Search found 11 matches
- Fri Aug 12, 2022 9:05 am
- Forum: FV-1 hardware questions
- Topic: Encoder
- Replies: 4
- Views: 6854
Re: Encoder
Thanks!
- Thu Aug 11, 2022 8:52 am
- Forum: FV-1 hardware questions
- Topic: Encoder
- Replies: 4
- Views: 6854
Re: Encoder
Frank, thanks!
S-1110A, has 16 positions. I wanted to connect it like you have on the board, without the last pin.
This is right?
http://ibb.co/FzNmbBh
(I'm sorry, I didn't understand how to add a picture.)
S-1110A, has 16 positions. I wanted to connect it like you have on the board, without the last pin.
This is right?
http://ibb.co/FzNmbBh
(I'm sorry, I didn't understand how to add a picture.)
- Thu Aug 11, 2022 6:38 am
- Forum: FV-1 hardware questions
- Topic: Encoder
- Replies: 4
- Views: 6854
Encoder
Hello! Can you please tell me if it is possible to use Coded Rotary Switches, such as https://www.mouser.bg/ProductDetail/Nidec-Copal/S-1110A?qs=XeJtXLiO41RVYQLIxSTlTg%3D%3D ? Maybe you can use EVQ-V9C00116E ( https://www.mouser.bg/ProductDetail/Panasonic/EVQ-V9C00116E?qs=XEFCt4oF%252BUq5XWd7wW4YmA%...
- Thu Jul 21, 2022 1:29 am
- Forum: FV-1 hardware questions
- Topic: Maximum input signal
- Replies: 3
- Views: 6417
Re: Maximum input signal
Thanks Frank. So it is impossible to use a circuit with diodes.
- Wed Jul 20, 2022 5:37 am
- Forum: FV-1 hardware questions
- Topic: Maximum input signal
- Replies: 3
- Views: 6417
Re: Maximum input signal
Sorry for the links. I cannot figure out how to add images to attachments.
- Wed Jul 20, 2022 5:28 am
- Forum: FV-1 hardware questions
- Topic: Maximum input signal
- Replies: 3
- Views: 6417
Maximum input signal
Hello! The documentation for the FV-1 says that the maximum input signal level should be in the range of 2.6V - 3V peak-to-peak. I have a problem. Each mic pre-out of the mixer can deliver a maximum of about 2.5V (at maximum gain). If only one input is used, that's fine. But if you use, for example,...
- Thu Apr 14, 2022 1:02 pm
- Forum: FV-1 hardware questions
- Topic: Serial connection
- Replies: 6
- Views: 12099
Re: Serial connection
Understood thanks!
Somehow I did not immediately think about two effects on one processor.
Somehow I did not immediately think about two effects on one processor.
- Wed Apr 06, 2022 1:11 pm
- Forum: FV-1 software questions
- Topic: Vocal
- Replies: 0
- Views: 34395
Vocal
Hi! Immediately I apologize for my English. I want to use the software that comes with the vocal mixer (http://www.spinsemi.com/mixer_application.html). Perhaps there are better programs for vocals. Interested in reverb, echo and chorus. Further commercial use is possible. If there are such programs...
- Wed Apr 06, 2022 1:03 pm
- Forum: FV-1 hardware questions
- Topic: Serial connection
- Replies: 6
- Views: 12099
Re: Serial connection
Frank, thanks!
Does anyone have any information on the first question? Have you tried connecting several FV-1s in series?
Does anyone have any information on the first question? Have you tried connecting several FV-1s in series?
- Wed Apr 06, 2022 4:20 am
- Forum: FV-1 hardware questions
- Topic: Serial connection
- Replies: 6
- Views: 12099
Re: Serial connection
Thanks! I thought about it. But if you want all three effects to work simultaneously, then you need three FV-1s. Since the settings for each effect are different.
- Tue Apr 05, 2022 1:27 pm
- Forum: FV-1 hardware questions
- Topic: Serial connection
- Replies: 6
- Views: 12099
Serial connection
Hi! I apologize for my poor knowledge of English. I want to develop a vocal processor. I wanted to use the Mixer Application (http://www.spinsemi.com/mixer_application.html) as a base. But connect several modules in series so that you can use several effects at the same time. The first module is for...