Spin Semiconductor

I made a PCB that I might publish, and may be some algorithms, but not sure about it yet.

Thanks very much for all these information.
I will then try to prototype a PCB with special care on the track length from the clock to the FV-1s and to the PSU.

OK, correct me if I am wrong, but if they share the same clock, considering the two FV-1 are set on the same external program and powered by the same supply, would the maximum de-synchronisation between the execution start points of each FV-1 be less than say ten sample steps (10/32768 s)? If so it ...

Supposing we have two FV-1 clocked by a common crystal external oscillator, is there a way two synchronise them, that is sharing a common start point such that the programs in both FV-1 can be executed in sync ?

Don't bother to answer. I have found that this subject was already addressed in the forum earlier...

http://www.spinsemi.com/forum/viewtopic.php?f=2&t=539

Hi
I wish to make a circuit with two FV-1 sharing the same external EEPROM, is it possible to do so directly (sharing the SDA and SCK pins) or would it require some addressing circuit (GATES or whatever)?

Thanks for your answer frank.
They are produced by ARTSCHIP and from the datasheets the specifications look similar.
I will give it try then and let you know about it.

As said in the title, is a 24LC32B an acceptable replacement for the 24LC32A to work with the FV-1 or is the 24LC32A compulsory ?
I have a batch 24LC32B, this is why I ask