Search found 12 matches
- Mon May 21, 2018 1:25 pm
- Forum: Algorithm development
- Topic: Octave +/- 1
- Replies: 6
- Views: 4596
Ok cool. It works now but here is the weird thing. I have two of the same unit that both work with some other stock reverb code. But when I flash the 24LC32A with this code, it works in one but does not work in the other. Again, a different reverb code worked in both. But with this octave code, only...
- Fri May 18, 2018 11:12 am
- Forum: Algorithm development
- Topic: Octave +/- 1
- Replies: 6
- Views: 4596
- Thu May 17, 2018 2:09 pm
- Forum: Algorithm development
- Topic: Octave +/- 1
- Replies: 6
- Views: 4596
Octave +/- 1
Can anyone point out why this code isn't working? Maybe I've been staring at it too long: delayd mem 4096 ; Down delay temp mem 1 ; Temp location for partial calculations ; SKP RUN ,START ; wldr RMP0,16384,4096 wldr RMP1,-8192,4096 ; START: LDAX ADCL ; Write it to left delay and clear ACC wra delayd...
- Mon Feb 08, 2016 2:24 pm
- Forum: FV-1 software questions
- Topic: Unwanted Distortion in Delay
- Replies: 7
- Views: 7387
I am basing my delay off of this and it works very well. But instead of having a mix between dry/wet, I would like to blend the octave up delay with the regular delay. ; Guitar Echo ; HK July 2009 ; version 2.0 ; ; mono in mono out ; pot0 = feedback amount (from no feedback = slap back to infinite f...
- Sat Feb 06, 2016 12:12 pm
- Forum: FV-1 software questions
- Topic: Unwanted Distortion in Delay
- Replies: 7
- Views: 7387
- Fri Feb 05, 2016 4:42 pm
- Forum: FV-1 software questions
- Topic: Unwanted Distortion in Delay
- Replies: 7
- Views: 7387
Unwanted Distortion in Delay
I am experiencing some weird distortion that I cannot track down on the delay tails. I feel like my gain on something is too high but I cant figure out what. Instead of a clean blend I am adding an octave blend. Thoughts? ; Guitar Echo ; HK July 2009 ; version 2.0 ; modified by Christian Terjesen / ...
- Wed Dec 16, 2015 7:58 pm
- Forum: FV-1 software questions
- Topic: Freeze Sampler / Looper
- Replies: 1
- Views: 5676
Freeze Sampler / Looper
How would I create a program that will record a buffer of samples and play them back in a loop using a pot to set the length of the loop? Sort of like a freeze pedal that will sustain the chord in the middle and hold it until the button is pressed again. I do not want to add loops on top of each oth...
- Tue Dec 15, 2015 9:18 pm
- Forum: FV-1 software questions
- Topic: Time and Pitch Shifting
- Replies: 8
- Views: 9853
I wish that I could use a separate analog output for my 'thru' jack but this project will have another program that will use both outputs. So for consistency, I need to code a thru output on the right channel. Thanks for the link! Looks like I have a bit of reading to do about ramps and pitch shifti...
- Mon Dec 14, 2015 3:32 pm
- Forum: FV-1 software questions
- Topic: Time and Pitch Shifting
- Replies: 8
- Views: 9853
- Sat Dec 12, 2015 1:42 pm
- Forum: FV-1 software questions
- Topic: Time and Pitch Shifting
- Replies: 8
- Views: 9853
- Sat Dec 05, 2015 5:22 pm
- Forum: FV-1 software questions
- Topic: Time and Pitch Shifting
- Replies: 8
- Views: 9853
Time and Pitch Shifting
Hey There, I put together a little program to delay the signal 0-1000ms and would like to implement some pitch shifting to do +/-20 cents from the original signal. Can someone point me in the right direction? Thanks! RDAX ADCL,1.0000000000 WRA 0,0.0 CLR OR $007FFF00 MULX POT0 RDFX REG1,0.0012500000 ...
- Wed Feb 18, 2015 12:30 am
- Forum: Algorithm development
- Topic: Modulated Reverb Tail VERIFIED CODE
- Replies: 2
- Views: 7041
Modulated Reverb Tail VERIFIED CODE
I have a few questions about further developing this code: How can we ... 1) Make the reverb smoother? (I can hear several taps in the tail rather than something that seems like real reverb.) 2) Increase the tail length and depth? 3) Modulate the tail to go ramp up in pitch after N seconds. N contro...