Search found 33 matches
- Wed Aug 28, 2019 7:14 am
- Forum: Algorithm development
- Topic: cabinet simulator
- Replies: 0
- Views: 30595
cabinet simulator
Hi, here's my first try with cabinet simulator. Some filters and a "room mic". I've attached an mp3 at Holy City Audio Forum. (dry, cab with controls at noon, cab with pot0 at max and cab with "room mic" at max) ; cabinet simulator.spcd ; Patch saved from SpinCAD Designer version...
- Thu Apr 24, 2014 12:23 am
- Forum: Algorithm development
- Topic: infinite FREEZE reverb
- Replies: 7
- Views: 12898
- Wed Apr 23, 2014 5:52 am
- Forum: Algorithm development
- Topic: infinite FREEZE reverb
- Replies: 7
- Views: 12898
- Fri Apr 18, 2014 3:38 pm
- Forum: Algorithm development
- Topic: infinite FREEZE reverb
- Replies: 7
- Views: 12898
OK,
I've made this using the infinite reverb program :
https://www.youtube.com/watch?v=uDttB9gZ-xs
Now the question : I want to select semitones (12 semitones) with pitch pots. This is possible with pot skip routine but.... how can I write it ?
I've made this using the infinite reverb program :
https://www.youtube.com/watch?v=uDttB9gZ-xs
Now the question : I want to select semitones (12 semitones) with pitch pots. This is possible with pot skip routine but.... how can I write it ?
- Sat Feb 22, 2014 8:36 am
- Forum: FV-1 software questions
- Topic: pot values
- Replies: 3
- Views: 7305
- Thu Feb 20, 2014 8:11 am
- Forum: FV-1 software questions
- Topic: pot values
- Replies: 3
- Views: 7305
pot values
Is it possible to give a pot a similar way to move ?
- Thu Feb 13, 2014 12:42 am
- Forum: Algorithm development
- Topic: Whammy
- Replies: 14
- Views: 28600
- Thu Feb 13, 2014 12:37 am
- Forum: Algorithm development
- Topic: infinite FREEZE reverb
- Replies: 7
- Views: 12898
- Wed Feb 12, 2014 3:40 am
- Forum: Algorithm development
- Topic: infinite FREEZE reverb
- Replies: 7
- Views: 12898
infinite FREEZE reverb
There is a very good freeze infinite reverb in free DSP program section (the reverb+pitch-LP program written by DAVE SPINKLER). A simple 2 position momentary switch (center pin POT0 , the others two pins goes to ground and 3,3v) can be used to obtain the freeze effect. A simple question : when I rel...
- Mon Sep 23, 2013 5:07 am
- Forum: FV-1 software questions
- Topic: hall reverb distortion
- Replies: 3
- Views: 6905
- Sun Sep 22, 2013 2:34 am
- Forum: FV-1 software questions
- Topic: hall reverb distortion
- Replies: 3
- Views: 6905
hall reverb distortion
Hi, I've built a simple guitar reverb pedal using hall reverb program. It's sounds good but I've noticed that when I pick hard on strings (with high values of reverb time) there is a cracking noise on the high frequency (llike a sssshhhh) on the reverb part only (not the dry signal). The schematic i...
- Tue Apr 16, 2013 12:22 am
- Forum: FV-1 hardware questions
- Topic: 24LC32 different types
- Replies: 1
- Views: 5863
24LC32 different types
Hi, is it possible to use a SOT-23 package for 24LC32 eeprom ?
Something like this one : http://it.mouser.com/ProductDetail/Micr ... E9ANLEk%3d
Mike.
Something like this one : http://it.mouser.com/ProductDetail/Micr ... E9ANLEk%3d
Mike.
- Tue Oct 30, 2012 2:53 am
- Forum: Algorithm development
- Topic: tap tempo snippet
- Replies: 84
- Views: 973547
- Thu Jun 30, 2011 12:13 pm
- Forum: Algorithm development
- Topic: simple 2 effects delay on right, reverb on left
- Replies: 6
- Views: 9169
Here's another program. This time I am started with 2 different programs (a basic reverb and a delay) join together. The problem now is that delay feedback doesn't work .... mmh.... Here's the program : ;pot0 = feedback ;pot1 = Delay time ;pot2 = reverb time mem delay 20000 ap1 mem 334 ap2 mem 556 a...
- Thu Jun 30, 2011 5:19 am
- Forum: Algorithm development
- Topic: simple 2 effects delay on right, reverb on left
- Replies: 6
- Views: 9169
Ok. I've changed the preogram to control reverb time. I still have a problem: the delay feedback control the reverb too. How can I separate reverb and delay ? Thanks. ;ECHO+REVERB. ;Pot0 = delay 100-500ms. ;Pot1 = repeat ;Pot2 = reverb time mem del 22938 mem ap1 123 mem ap2 245 mem ap3 625 mem ap4 8...