16 pos encoder

Hardware questions and issues with the FV-1

Moderator: frank

Post Reply
amz-fx
Posts: 38
Joined: Wed Sep 06, 2006 7:06 am
Location: Louisiana, USA
Contact:

16 pos encoder

Post by amz-fx »

Can you give us the part number and where to find the 16 pos encoder used in the mixer apps? It is shown here on the left:

Image

Thanks, Jack
amz-fx
Posts: 38
Joined: Wed Sep 06, 2006 7:06 am
Location: Louisiana, USA
Contact:

Post by amz-fx »

^bump

Frank? Keith?

thanks!
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

Keith built that board so I don't have a BOM for it, I've emailed him asking the part number (he's out of the country at the moment) .
Frank Thomson
Experimental Noize
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

Email me for datasheet.
Frank Thomson
Experimental Noize
Alex MAK
Posts: 89
Joined: Fri Nov 05, 2010 1:00 pm

Post by Alex MAK »

Frank, tell mark encoder which is used in the demo board. Thank you!
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

That encoder is only available in Taiwan, better to find a local supplier than try to get that encoder.
Frank Thomson
Experimental Noize
Alex MAK
Posts: 89
Joined: Fri Nov 05, 2010 1:00 pm

Post by Alex MAK »

Thanks Frank. I use 16 position encoders. For some ideas with FV-1 needed 8 position. It is possible to order radio parts from anywhere in the world :). If you do not impede prompt his mark, or a link to the website where you can buy :)
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

It is made by Hung Ta Enterprise in Taiwan. That is all the information I have for it.
Frank Thomson
Experimental Noize
Alex MAK
Posts: 89
Joined: Fri Nov 05, 2010 1:00 pm

Post by Alex MAK »

Thank you!
Alex MAK
Posts: 89
Joined: Fri Nov 05, 2010 1:00 pm

Post by Alex MAK »

This is my version of the scheme on the 16 effects. Works fine. Maybe there are mistakes, I welcome your feedback.
Image
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

Having trouble getting the file, I get about 6MB and it stops.

Unrelated questions...
Can you tell me the name of the film they are advertising on the file site? The graphics look good. And do you know if they ever made the third film in the "Nochnoy dozor"/"Dnevnoy dozor" series?
Frank Thomson
Experimental Noize
Alex MAK
Posts: 89
Joined: Fri Nov 05, 2010 1:00 pm

Post by Alex MAK »

This movie is only 2, Night Watch and Day Watch. "Books have several different. Tell me what the exchanger can be laid out scheme. PDF format.
Image
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

OK, I can see that image, schematic looks good to me. Will be interested to hear how it works.
Frank Thomson
Experimental Noize
Alex MAK
Posts: 89
Joined: Fri Nov 05, 2010 1:00 pm

Post by Alex MAK »

The scheme works well. Scheme designed to get the device 16 effects to choose from:). For some devices that would be enough, and 8, but the encoder can not find. Are being developed and other devices with FV-1. I will continue to spread the development here on the forum:)
Post Reply