Hello,
I am a beginner in programming module such as the FV-1. I tried a sample programs provided on the site page http://www.spinsemi.com/knowledge_base/ ... mples.html
Generating triangle waves
skp run,1
wldr rmp0,10,4096
cho rdal,rmp0
sof 1,-0.25
absa
But the output signal is not changed . Could someone help me? I think i must add inputs (ADCL or ADCR) and outputs (DACL or DACR) but i don't know how.
Thank you.
Beginner
Moderator: frank
Add to the end of the program:
wrax dacl, 1.0
wrax dacr,0
That should output the result to both the left and right DAC outputs.
wrax dacl, 1.0
wrax dacr,0
That should output the result to both the left and right DAC outputs.
Frank Thomson
Experimental Noize
Experimental Noize
Well this is just a triangle generator so there is no input to it. If you are looking at doing something like a chorus see this PDF http://www.spinsemi.com/Products/appnot ... N-0001.pdf
You are going to need to read alot of things if you are not experienced doing DSP or microcontroller programming.
You are going to need to read alot of things if you are not experienced doing DSP or microcontroller programming.
Frank Thomson
Experimental Noize
Experimental Noize