SKRM board input/output networks

Hardware questions and issues with the FV-1

Moderator: frank

Post Reply
Dedjazzgadgetz
Posts: 22
Joined: Thu Dec 08, 2011 9:23 pm
Location: Montréal, Canada

SKRM board input/output networks

Post by Dedjazzgadgetz »

Hello Frank !

Are the input/output networks of the SKRM-C8 boards pretty much/exactly what is found on the dev. board schematics ? (well, mmmh... doesn't look like it...)

If not, is there a definitive SKRM schematic (I might have missed) available for reference, anywhere ?

I guess if I wanted output all the way down to DC from the FV-1 on those boards (say, for testing out LFOs, ramps, etc.), I'd have to bypass R104/R105 (470R), C129/C128 ( ? F) & C115/C116 ( ? F) altogether, and tap directly from pins 27 & 28, right ?

TIA !
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

Not identical but similar. The SKRM schematic is not available but you are correct, you would want to monitor the pins right at the FV-1 to see DC on an output.
Frank Thomson
Experimental Noize
Post Reply