8 seconds delay
Moderator: frank
-
- Posts: 338
- Joined: Mon Nov 12, 2012 1:12 pm
- Contact:
Thanks, I'm testing this soft now. But, unfortunately, I see your last version (#399) has some bugs (for example window with information about max used instructions that is displaying all time and can't close it).
Just one more question about programming eeprom - this memory has address inputs A0-A2. Can I use one eeprom for 3 banks of effects ? For example, effects 0-7 are in bank 1 (A0A1A2 - 000), and when I go to effect >8 on uC, then it switchs to bank 2 (A0A1A2 - 100). Is that possible ?
Just one more question about programming eeprom - this memory has address inputs A0-A2. Can I use one eeprom for 3 banks of effects ? For example, effects 0-7 are in bank 1 (A0A1A2 - 000), and when I go to effect >8 on uC, then it switchs to bank 2 (A0A1A2 - 100). Is that possible ?
-
- Posts: 338
- Joined: Mon Nov 12, 2012 1:12 pm
- Contact:
I'm going to make my own effector, I assume to use a microprocessor to control FV-1 and control main parametr of effect by platter disc, exactly like in Pioneer effectors (Google: Pioneer FX500 or Pioneer FX1000). I want to add a second parametr to regulation and mix. That's all I can say about my construction
I'll check further your soft soon and report bugs on your forum.
I'll check further your soft soon and report bugs on your forum.
Assuming it is for guitar. The voltage out of the guitar is assumed 1 volt p/p the signal into the A/D port should then be 3.2 volts to assure S/N is optimal. Why not using a stage in between to achieve this?sebxx4 wrote:What do you say about this ?
I think, in that way I can connect much more eeproms by adding next gates. Do you think it will work ?
Piet