hi
You can send me the hex of following programs.
hall
room
plate
gate
echo\rev
st echo\rev
chor\rev
flange
and then can i programs hex file with general eeprom programmer?
thanks
hex of program
Moderator: frank
What you need to do is download all these programs from the spin site then compile the hex in the SpinIDE then use whatever programmer you have to program the hex file to the EEPROM.
www.stanleyfx.co.uk
"It's fairly straight forward, if you want to start it press start, you can work out the rest of the controls yourself."
"It's fairly straight forward, if you want to start it press start, you can work out the rest of the controls yourself."