DIY Eurorack for FV1
Moderator: frank
-
- Posts: 2
- Joined: Fri Dec 29, 2017 2:22 pm
DIY Eurorack for FV1
I want to eurorack my FV1 (When I get it) has anyone done this or something similar? I assume it would be as simple as mounting the board on a faceplate and connecting up some pots and the audio connections. Will it be possible to de-solder the audio connections and pots to mount new ones on a faceplate?
The FV-1 is the chip not a board, do you mean a dev board? If so you might want to see if you need any buffering, I do not know if there is any standard for euro rack signal levels. Also you risk damaging the board by pulling/replacing connectors.
Frank Thomson
Experimental Noize
Experimental Noize
-
- Posts: 2
- Joined: Fri Dec 29, 2017 2:22 pm
-
- Posts: 338
- Joined: Mon Nov 12, 2012 1:12 pm
- Contact:
You might be interested in this - http://gbiswell.myzen.co.uk/Dervish_intro.html
-
- Posts: 71
- Joined: Fri Dec 12, 2014 10:45 pm
- Location: Detroit,MI
- Contact:
Yeah the dervish and the mxmxmx
https://github.com/mxmxmx/spinFV1/wiki
https://github.com/mxmxmx/spinFV1/wiki