Both EPROMS have no connection to the write protect pin, should be either ground or +V but that should not effect the switching. Check that your switching is actually putting out the correct binary for all 8 positions. I would use 22k pull down resistors instead of 100k. (but 100k should work). Have you got all the switching diodes in the correct way?sashaagafonoff wrote: ↑Fri Apr 26, 2019 6:20 pm Try it now, I've updated the permissions on the images... Sorry, I haven't used S3 for a while and they lock down things differently...
2 xFV-1 considerations ?
Moderator: frank
Re: 2 xFV-1 considerations ?
www.stanleyfx.co.uk
"It's fairly straight forward, if you want to start it press start, you can work out the rest of the controls yourself."
"It's fairly straight forward, if you want to start it press start, you can work out the rest of the controls yourself."