Wrong internal program at startup.

Hardware questions and issues with the FV-1

Moderator: frank

Post Reply
Karel
Posts: 3
Joined: Wed Jun 29, 2011 2:16 pm

Wrong internal program at startup.

Post by Karel »

Greetings!

I have a problem where the FV-1 is not starting in the correct program. I have 11 each assemblies, and 8 each of them start with the wrong program. I am selecting internal program 6 at startup ("Reverb 1", S0=L, S1=H, S2=H), but something else is coming up that has a modulation effect.

Anybody else seen this and/or have any suggestions? Thanks.
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

We have never seen that (by design it shouldn't be possible), please email support with schematic and any notes about your design.
Frank Thomson
Experimental Noize
Karel
Posts: 3
Joined: Wed Jun 29, 2011 2:16 pm

Post by Karel »

I'll contact support. Thanks!
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

Been monitoring support's email, I haven't seen a message come in yet for this. Did you send it?
Frank Thomson
Experimental Noize
Karel
Posts: 3
Joined: Wed Jun 29, 2011 2:16 pm

Post by Karel »

I haven't contacted support yet. I'm adding additional supply bypassing. It seems to help, but not completely solve the problem.

I'll likely send in the info this afternoon. Thanks.
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

Issue resolved through support emails. All good now :D
Frank Thomson
Experimental Noize
Post Reply