Spin Semiconductor

Posted: **Thu Jul 05, 2012 8:20 am**

Hi There！

Difficult to buy a SPN1001-DEV development board in China，But I need to download these programs to the chip and external EEPROM。

Can I download a program by other downloader to the external memory or internal EEPROM ?

"***.spn" file compile to "***.HEX" flie , and download to the EEPROM or FV-1,
The "***"program will be able to run ?

Thank you very much!

Best Regards！

（您好，在中国很难买到SPN1001开发板，但是我需要下载自己编写的程序给FV-1和芯片外部的EEPROM，所以在这和各位请教这些问题。

我将程序编译成***.hex 文件，然后用其他的下载器下载到EEPROM或是FV-1内的EEPROM，这样可以吗？如果能下载HEX，我的FV-1可以正常运行这些程序吗？

谢谢您，等您的答复。
祝各位万事如意！）

Posted: **Thu Jul 05, 2012 10:54 am**

SpinAsm will assemble a project (a set of up to 8 programs) into an Intel HEX format file that can be used with a device programmer to program an EEPROM.

See "SpinAsm Project Mode" in the SpinAsm user manual page 17 http://www.spinsemi.com/Products/datash ... Manual.pdf

Posted: **Fri Jul 06, 2012 5:47 am**

Thank you very much！

I saw the page 17,but it is not my question。
I know：â€œSpinAsm will assemble a project (a set of up to 8 programs) into an Intel HEX format file that can be used with a device programmer to program an EEPROM. â€

I have other downloader，and I can download HEX file to the external EEPROM chip（24C32）.

Download the â€œIntel HEX format fileâ€ to EEPROM ,only by SPN1001-DEV development board ?? other dowmloader?

Is there other medium (way) to download â€œIntel HEX format fileâ€ to the FV-1 and EEPROM?

Is there some other distributor in China to buy developer board（ SPN1001-DEV development board）?

I work in Tangshan KAIYUAN Panasonic China
Tangshan New & High-tech Development Zone,Hebei Province,China.

Thanks!

Posted: **Fri Jul 06, 2012 9:13 am**

SpinAsm will create a HEX file so if you have another downloader that can read HEX and write to a 24LC32A then that should work. There is no EEPROM in the FV-1 so all custom programs must be in the external memory.

Please private message me with your email address or send it to support at spinsemi.com and I will send it to the Asia distributor in Taiwan and they may be able to better answer your questions.

Posted: **Fri Jul 06, 2012 11:32 pm**

I have sent two e-mails to â€œinfo@oct-distribution.comâ€and â€œinfo@spinsemi.comâ€œ。