Hi! I'm running this simple program:
wrax wrax dacr,0
Circuit is: Input Buffer=>FV1=>Output buffer
Im feeding the input with a sinewave 1vpp, and at the output of the FV1 the signal is slightly weaker (10% or 15% less tan the input). Is this normal?
I've noticed that the datasheet suggest for the fv1output a 3.3uf, 10k, 1k and 2.2nf. If i measure with the scope between 3.3.uf and 1K signal is not attenuated. Is there a solution for this?
Hardware questions and issues with the FV-1
2 posts • Page 1 of 1