OUTPUT FILTERS

Hardware questions and issues with the FV-1

Moderator: frank

Post Reply
Mcfly
Posts: 46
Joined: Fri Mar 08, 2013 2:38 pm
Location: Argentina

OUTPUT FILTERS

Post by Mcfly »

Hi! I'm running this simple program:

rdax adcr,1
wrax wrax dacr,0

Circuit is: Input Buffer=>FV1=>Output buffer

Im feeding the input with a sinewave 1vpp, and at the output of the FV1 the signal is slightly weaker (10% or 15% less tan the input). Is this normal?

I've noticed that the datasheet suggest for the fv1output a 3.3uf, 10k, 1k and 2.2nf. If i measure with the scope between 3.3.uf and 1K signal is not attenuated. Is there a solution for this?
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

Post the schematic.
Frank Thomson
Experimental Noize
Post Reply