Spin Semiconductor Forum Index Spin Semiconductor
Support forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Very basic questions on chip function

 
Post new topic   Reply to topic    Spin Semiconductor Forum Index -> FV-1 hardware questions
View previous topic :: View next topic  
Author Message
dkleinjans



Joined: 03 Dec 2015
Posts: 10

PostPosted: Fri Mar 11, 2016 10:53 am    Post subject: Very basic questions on chip function Reply with quote

I've tried to find the answers, but am not certain.

1. Does the FV-1 run one program loop per oscillator cycle, regardless whether the program is 2 lines or 128 lines long? I believe that's true, and the unused lines are filled with no-ops.

2. Does the FV-1 sample and hold the inputs? For example, if you read adcl (or a pot) at two different times/places in your program, will it give the same result each time, or might it change in the interim? I would think it would be sample and hold.

Thanks for any clarification.
Back to top
View user's profile Send private message
frank



Joined: 19 Oct 2005
Posts: 972

PostPosted: Fri Mar 11, 2016 2:11 pm    Post subject: Re: Very basic questions on chip function Reply with quote

dkleinjans wrote:

1. Does the FV-1 run one program loop per oscillator cycle, regardless whether the program is 2 lines or 128 lines long? I believe that's true, and the unused lines are filled with no-ops.

2. Does the FV-1 sample and hold the inputs? For example, if you read adcl (or a pot) at two different times/places in your program, will it give the same result each time, or might it change in the interim? I would think it would be sample and hold.


You are correct on both items.
_________________
Frank Thomson
Experimental Noize
Back to top
View user's profile Send private message Visit poster's website
dkleinjans



Joined: 03 Dec 2015
Posts: 10

PostPosted: Mon Mar 14, 2016 3:33 am    Post subject: Re: Very basic questions on chip function Reply with quote

frank wrote:
dkleinjans wrote:

1. Does the FV-1 run one program loop per oscillator cycle, regardless whether the program is 2 lines or 128 lines long? I believe that's true, and the unused lines are filled with no-ops.

2. Does the FV-1 sample and hold the inputs? For example, if you read adcl (or a pot) at two different times/places in your program, will it give the same result each time, or might it change in the interim? I would think it would be sample and hold.


You are correct on both items.


Thanks, Frank.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Spin Semiconductor Forum Index -> FV-1 hardware questions All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group