fv-1 not showing signal at output
Posted: Wed Jul 06, 2016 10:38 am
Hi all,
I used this design to try the fv-1 chip but there is no output signal at output pins.
The circuit is powered correctly, the oscillator is working at 32.768khz correctly.
Can someone tell me where can be the problem?
NOTE: R10, R12 and R14 are JUMPERS.
![Image](https://s31.postimg.org/x1bt73dyj/fv_1.jpg)
I used this design to try the fv-1 chip but there is no output signal at output pins.
The circuit is powered correctly, the oscillator is working at 32.768khz correctly.
Can someone tell me where can be the problem?
NOTE: R10, R12 and R14 are JUMPERS.
![Image](https://s31.postimg.org/x1bt73dyj/fv_1.jpg)