Sharing an EEPROM between two FV-1

Hardware questions and issues with the FV-1

Moderator: frank

Post Reply
yusynth
Posts: 8
Joined: Mon Jan 31, 2011 3:15 pm
Contact:

Sharing an EEPROM between two FV-1

Post by yusynth »

Hi
I wish to make a circuit with two FV-1 sharing the same external EEPROM, is it possible to do so directly (sharing the SDA and SCK pins) or would it require some addressing circuit (GATES or whatever)?
Yves - yusynth
yusynth
Posts: 8
Joined: Mon Jan 31, 2011 3:15 pm
Contact:

Re: Sharing an EEPROM between two FV-1

Post by yusynth »

Don't bother to answer. I have found that this subject was already addressed in the forum earlier...

http://www.spinsemi.com/forum/viewtopic.php?f=2&t=539
Yves - yusynth
Post Reply