File .HEX Will be installed at which?
Moderator: frank
Re: File .HEX Will be installed at which?
Your question is unclear. Please explain it better. Are you asking about that specific file or HEX files in general?
Frank Thomson
Experimental Noize
Experimental Noize
Re: File .HEX Will be installed at which?
Write down 24LC64p Yes or no
Re: File .HEX Will be installed at which?
program 0
s0= 0
s1= 0
s2= 0
or
s0= 1
s1= 1
s2= 1
Thank You
s0= 0
s1= 0
s2= 0
or
s0= 1
s1= 1
s2= 1
Thank You
Re: File .HEX Will be installed at which?
program
0=000
1=???
2=???
3=???
4=???
5=???
6=???
7=???
Thank You
0=000
1=???
2=???
3=???
4=???
5=???
6=???
7=???
Thank You
Re: File .HEX Will be installed at which?
Well lets see, the program selection uses 3 bit binary code on the S0-S2 pins to select 1 of the 8 programs. So if program 0 has a binary code of 000 then you can work out what the next program would be ? Well I can tell you that would mean program 1 would be 001. I'm sure you can work out the rest of the binary counting yourself or if you are unfamiliar with any of this then you can easily look up 3 bit binary counting in google for an answer. It is better to understand why you are doing something than just being spoon fed the answer. I hope you can easily figure this out from my reply.
www.stanleyfx.co.uk
"It's fairly straight forward, if you want to start it press start, you can work out the rest of the controls yourself."
"It's fairly straight forward, if you want to start it press start, you can work out the rest of the controls yourself."
Re: File .HEX Will be installed at which?
Thank You
I understand very much
I understand very much