Start-up noise

Hardware questions and issues with the FV-1

Moderator: frank

Post Reply
FUCHSAUDIO
Posts: 11
Joined: Tue Dec 09, 2008 8:50 am
Location: New Jersey
Contact:

Start-up noise

Post by FUCHSAUDIO »

When I first power up the FV-1 (into a "live" amp) it makes a rushing white noise, which tapers down to '0' in about 3-seconds. Is this normal, or should I consider a turn-on mute circuit for my product ?
Improving guitar tone, one player at a time....
frank
Posts: 1244
Joined: Wed Oct 19, 2005 12:26 pm
Contact:

Post by frank »

The FV-1 has an internal mute circuit so it shouldn't be putting out any rush of noise at power-up. But if the 3.3V rail comes up slow that could cause the part to not reset quickly (problem with all digital circuits) or if the xtal used has any start up issues (15pf cap in example schematic from X2 to gnd can address this issue) then it may generate noise. Check power rails and xtal to start.
Frank Thomson
Experimental Noize
FUCHSAUDIO
Posts: 11
Joined: Tue Dec 09, 2008 8:50 am
Location: New Jersey
Contact:

Thanks Frank

Post by FUCHSAUDIO »

I'll reduce my filter cap values on the 3.3 supply, and add that 15-pf cap.

It works without, but now we know why we should have it.... :)
Improving guitar tone, one player at a time....
Post Reply