Spin Semiconductor

I noticed the 24LC32A EEPROM can be had in a SOT23-5 package. Probably a dumb question but I'd like reassurance before I manufacture a PCB. Would this work the same as a SOIC-8 package unit when communicating with the FV1? Assuming I don't need the additional functionality available in the SOIC-8 package. The SOT23 lacks the A0, A1, A2 pins. According to the datasheet:

"For the SOT-23 package, Chip Address Inputs are not available and are not connected."

and

"For the SOT-23 package, the address pins are not available. During device addressing, the A1, A2 and A0 Chip Selects bits should be set to ‘0’."

24LC23A range overview from digikey:
https://www.digikey.no/no/products/base ... LC32A/4440

Datasheet:
[url]chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://ww1.microchip.com/downloads/aem ... 001713.pdf[/url]

Shouldn't be any problem using those. The main difference with the SOIC-8 package (beside the size... ) it's that the address is fixed to 0 and that's exactly what you need on the FV-1.

Thank you! Now to cram even more stuff onto my PCBs...