16 pos encoder

amz-fx · Post by **amz-fx** » Sun Aug 05, 2007 4:36 pm

Can you give us the part number and where to find the 16 pos encoder used in the mixer apps? It is shown here on the left:

Thanks, Jack

amz-fx · Post by **amz-fx** » Fri Aug 31, 2007 3:44 pm

^bump

Frank? Keith?

thanks!

frank · Post by **frank** » Sat Sep 01, 2007 11:02 am

Keith built that board so I don't have a BOM for it, I've emailed him asking the part number (he's out of the country at the moment) .

frank · Post by **frank** » Mon Sep 03, 2007 9:47 am

Email me for datasheet.

Alex MAK · Post by **Alex MAK** » Tue Dec 21, 2010 1:25 pm

Frank, tell mark encoder which is used in the demo board. Thank you!

frank · Post by **frank** » Wed Dec 22, 2010 4:10 pm

That encoder is only available in Taiwan, better to find a local supplier than try to get that encoder.

Alex MAK · Post by **Alex MAK** » Wed Dec 22, 2010 4:19 pm

Thanks Frank. I use 16 position encoders. For some ideas with FV-1 needed 8 position. It is possible to order radio parts from anywhere in the world

. If you do not impede prompt his mark, or a link to the website where you can buy

frank · Post by **frank** » Wed Dec 22, 2010 6:35 pm

It is made by Hung Ta Enterprise in Taiwan. That is all the information I have for it.

Alex MAK · Post by **Alex MAK** » Thu Dec 23, 2010 1:12 pm

Thank you!

Alex MAK · Post by **Alex MAK** » Wed Mar 02, 2011 3:51 am

This is my version of the scheme on the 16 effects. Works fine. Maybe there are mistakes, I welcome your feedback.

frank · Post by **frank** » Wed Mar 02, 2011 9:54 am

Having trouble getting the file, I get about 6MB and it stops.

Unrelated questions...
Can you tell me the name of the film they are advertising on the file site? The graphics look good. And do you know if they ever made the third film in the "Nochnoy dozor"/"Dnevnoy dozor" series?

Alex MAK · Post by **Alex MAK** » Thu Mar 03, 2011 4:29 am

This movie is only 2, Night Watch and Day Watch. "Books have several different. Tell me what the exchanger can be laid out scheme. PDF format.

frank · Post by **frank** » Thu Mar 03, 2011 9:51 am

OK, I can see that image, schematic looks good to me. Will be interested to hear how it works.

Alex MAK · Post by **Alex MAK** » Thu Mar 03, 2011 11:41 am

The scheme works well. Scheme designed to get the device 16 effects to choose from:). For some devices that would be enough, and 8, but the encoder can not find. Are being developed and other devices with FV-1. I will continue to spread the development here on the forum:)