Control Pots to 3 boards

Dedjazzgadgetz · Post by **Dedjazzgadgetz** » Wed Feb 20, 2013 12:55 pm

Hi Frank !

I'm using 3 SKRM-C8s for a parallel processing, 6 ins/6 outs hexaphonic guitar experiment... could just 3 control pots be used directly into all 3 boards simultaneously (all on the same algorithm... for now !

) or are buffers needed for every input and/or pots ?

TIA !

frank · Post by **frank** » Wed Feb 20, 2013 1:52 pm

For the POTs you should be able to run the control voltage to all 3 boards as long as they share a common ground.

For the signal inputs all needing buffers, that will depend on your design, the signal sources,etc.